New BioJet Macro-Molecular Beam

	Scientific

New BioJet Macro-Molecular Beam Injector UHV System:

for Biology, MALDI-TOF-MS, Organic Semiconductors, NanoTechnology, Organic Surface Chemistry
High-Intensity Beams for Beam-Surface Reaction and Time-Resolved Reaction Experiments
Macro-Molecular Beam Injector for Collimated, Scanable, High Flux Molecular Beam (Organic Molecules, DNA, BioClusters >300,000 Dalton) with well Controlled Parameters
Electro-Spray Inlet System with High Intensity Beam Ion Source (Primary Ion Energies of 0.5 - 5 keV)
Heatable and Exchangeable Output Aperture for Material Condensation Prevention
UHV System with Multi-Stage Differential Pumping System for UVH Compatible Beam Conditions
Beam Control/Modulation with Shutter and Optical Chopper (0 to 200 Hz)

BioJet for Beam Generation and Beam Forming UHV System

BioJet Macro-Molecular Beam Injector System,for time-resolved experiments and formation of high-intensity macro-molecular beams, with the following specifications:

BioJet for Beam Generation and Beam Forming.

The Macro-Molecular Beam Injector is designed to produce a collimated, scanable, high flux molecular beam (organic molecules, DNA etc.) with well controlled parameters. It is further equipped with effective heating to prevent material condensation at the orifice. The electro-spray inlet system and source design fit the production of macro-molecular beams.UVH compatible conditions at the end stage of the molecular beam injector are established with a multi-stage pumping system. The differentially pumped pressure system (2 additional differential pumping stages) guarantees a final pressure at the heatable output aperture (SEM aperture, exchangeable, Standard Material = Molybdenum) of 2.10-9 mbar. A shutter and an optical chopper are included in order to control/modulate the gas beam flux

Ionization Technique and Beam Introduction System:

High intensity beam ion source for generation of multiple-charges macro-molecule clusters
Direct Beam Inlet System with high vacuum lock and insertion device (optionally heatable)
Organic-Molecule Emitter up to 10 µA Emission
Primary ion energies of 0.5 - 5 keV
Scan area: 10 x 10 mm
Mounting flange DN 63 CF (4.5 '')
With working distance of up to 50 mm
Set of installation and instruction manuals, mounting kit. Incl.

Power Unit for BioJet Molecular Beam Injector:

High Voltage Power Supply and Scan Unit
Large display with high brightness for permanent status control
The Power Unit can be completely remote controlled: Different computer interface busses are included (IEC 488, RS 232)
Maximum Output Voltage: 5000 Volt
Power: 230/115 V, 120VA, 50/60 Hz

NanoJet Miniature BioJet for Beam Generation and Beam Forming UHV System

Direct Beam Inlet System for Gas Beam Source, consisting of

For Macro-Molecules, Organic and Bio-Materials
Beam injector unit made of Quartz Glass or Metal Container
Up to 500 cc volume
Research grade materials with highest purity
Five reserve systems
Minimal dead space transfer tubes connected via 1 high-precision valves to the beam forming chamber.
Heating facility for capillary is optionally available. Incl.

Heatable and Exchangeable Output Aperture for Material Condensation Prevention

SEM aperture, exchangeable, Standard Material = Molybdenum
With PBN insulators and K-type thermocouple
With AC-power supply unit (100W), Eurotherm PID- controller, cables, remote control via PC, cables
Incl.

Beam Chamber (stainless steel) for Beam Generation and Beam Forming:

The Chamber is equipped with flanges for:
- Direct Beam Inlet System
- Mechanical chopper, Sapphire shutter
- 2 Differential pumping stages with Vacuum pumps, vacuum gauges, valving and piping
- Residual Gas Mass Analyzer
- Gate valve
- Viewports, Spare flanges: 2 x DN 35CF, 2 x DN 63CF
Pumping system for the gas beam chamber, consisting of:
2 Oil-free turbo molecular pumps (Pfeiffer TMU 510), pumping speed: 500 liters/sec, with valve, power supply and cable.
2 Oil-free roughing pumps, including all supplies, valves and conductions
Pressure Measurement for preparation chamber: Ion gauge with controller and bakeable cable (5m) Incl.
Mass Spectrometer System, consisting of RGA head and controller

Bench and Bake Out Ovens:

Stainless steel frame movable and adjustable
Flexible isolating bake out cover and rigid support framework,
Heaters, bake out control unit HR 10 with timer for max. bake out cycles of 62 hours
Power control unit PU 20" 1 x 19, bakeable cables.
Electronic rack with air cooling and electric sockets Incl.

BIO-OLED - Bio-Organic Layer Deposition System

OPTIONS:

Beam Shutter and Optical Chopper for Control and Modulation of the Molecular Beam Flux:

Beam Shutter made of Sapphire
Optical Beam Chopper with Continuous Rotation
The frequency of the electron pulses can be adjusted continuously from 0 to 250 Hz.
Adaptable to all BioJet Macro-Molecule Beam Injectors
Power Supply with constant or pulsed Beam modes.
Power: 230/115 V, 120VA, 50/60 Hz

Heating Facility for Direct Beam Inlet System:

Heating Jacket for Glass/Metal Capillary
For Material Condensation Prevention
Power Supply with 230/115 V, 10Amp, 6Volt, 50/60 Hz

Please download your BioJet Macro Molecular Injector System Brochure(PDF)