New eLockIn 204 Digital Quad-Cha

	Scientific

New eLockIn 204 Digital Quad-Channel High-Frequency Lock-In Amplifier

- from Anfatec -

The eLockIn204 lockin amplifier has several parameters and features which are only found in these Anfatec instruments. The most unique are:

Input sampling rate of 40 MHz (fully digital design, 1 MHz bandwidth)
real quad-channel amplification in the full frequency range
4 channel output data rate of 156 kHz
dual harmonic mode in the full frequency range
on-screen 4-channel spectra acquisition
web-interface for external communication

The eLockIn204 can be used as spectrum analyser, as oscilloscope, as sinus generator or as measurement control system. It provides 8 A/D channels as external inputs and controls
8 D/A channels with 156 kHz update rate as external signal outputs. It can store 32 MByte data, provides modern network connection and USB connection.

Moreover, it acts as web server and all data are available over the internet.

SPECIFICATIONS:

Dynamic Reserve	> 135 dB
Remote Control	Ethernet
Integrated Oscillator	10 mHz ... >1 MHz (3 mHz resolution)
Noise @ 1 kHz	< 6 nV_rms/Hz ^0.5
Time constants	100 µs... 1 ks
Sensivity ranges	10 nV ... 10 V
Phase resolution	0.001 deg
Frequency stability @ 10 kHz	50 mHz/year (@ 20 °C +/- 3 °C)

Special Features in Brief:

Digital 4-channel LockIn amplifier between 3 mHz and 1 MHz with reference output and reference input (1^st to 15^th harmonic) with approximately 40 kHz update rate
Spectrum analyzer
Analogue output of 4 channels with 156 kHz sampling rate
4 channel oscilloscope (4 out of 4 LockIn channels and 8 external channels)
Measurement system with 8 AUX-In and 8 AUX-Out
with 24 bit resolution and 160 kHz update rate
USB and Network connection, parallel and serial port
32 MB data space
Webserver for web access of all data
Reference input with less than10 degree phase deviation (over the full frequency range)

Specification of the LockIn Amplifier:

Signal Input

Voltage Input	BNC
Input Impedance	100 kHz \|\| 20 pF
Damage Threshold	> +/- 12 V
Bandwidth	DC to > 1 MHz (3 dB BW)
Full Scale Sensitivity	10 V, 1 V, 100 mV
Typical Input Noise:
@ 100 kHz, high dynamic	< 300
@ 100 kHz, normal dynamic	< 50
@ 100 kHz, low dynamic	< 6 (typ. 5)
RollOff	6 dB/oct, 12 dB/oct, 24 dB/oct
Time Constants	0.1 ms ... 1 ks
Gain deviations between dynamic ranges:	< 1%
Gain deviations between different time constants:	< 1%

Reference Output

Internal Oscillator	10 mHz .. > 1 MHz
Frequency Resolution	< 3 mHz
Frequency Accuracy	+/- 50 ppm from 0°C to 70 °C
Reference Output Voltage	< 1 mVpp ... max. 20 Vpp
Output Noise @ 100 kHz for 7 V_rms output	< 60

Reference Input

Frequency range	1 Hz to 1 MHz
Locking time	< 10 periods + 200 ms
Phase error	< 10 degree (over full frequency range)

Manual of the eLockIn204 (PDF, 965 k)

Main screen of the lockin display

Measurement screen

Oscillloscope screen

SPECS Technologies Corporation
3318 Plantation Dr.
Sarasota, Florida 34231
Phone: (941) 362-4877
Fax: (941) 364-9706
support@specs.com